Surface Prep Instructions

For best adhesion, remove any dirt, dust, grease, etc to prepare the surface you want to decorate with EasyPSV. The following cleaning method is not recommended for porous surfaces such as unfinished/untreated wood. It is recommended that all other surfaces be spot tested with care before cleaning the entire application area.

Non-porous surfaces can be cleaned with a mix of approximately 2 parts water and 1 part isopropyl alcohol (70% or higher for best results) or non-ammonia based window cleaner. Use a microfiber or lint free towel to clean the application area with the mixture. Paper towel is not recommended since it will leave behind small bits of paper that can become trapped under the EasyPSV during application. Ensure the area is completely dry before applying.

Application Instructions

Place EasyPSV with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
Weed excess vinyl.
Remove the application tape's paper liner. Place tape on top of EasyPSV and burnish with a squeegee.
Lift the application tape and EasyPSV away from the paper liner to expose the permanent adhesive.
Place the application tape on your desired object and burnish with a squeegee to fully adhere the design.
Gently peel away the application tape, leaving just your EasyPSV design on the object.

Siser® EasyPSV - Permanent - Rose Gold